Blog
16 Nov 2026
CSV vs layer attribute: which rooftop height format fits your workflowA site acquisition planner's guide to choosing between CSV and GIS layer attribute delivery for building height and storey data.
16 Nov 2026
Field notes: the annual refresh that caught a rooftop addition three towns overA routine annual height refresh flagged a storey jump on a building nobody had scoped in years. Here's why that matters for clearance planning.
9 Nov 2026
Rooftop water towers and the storey-count trap in shadow-derived heightsA rooftop water tower's shadow can make a building read a storey or two taller than it is. Here's how to catch that before you trust the number.
9 Nov 2026
What is floor-to-floor height, and why it throws off a desk-based storey countFloor-to-floor height isn't a fixed number, and that's exactly why dividing a rooftop height by 3m to get a storey count goes wrong.
2 Nov 2026
The rooftop that counted six storeys from the curb and four from aboveWhy street-level storey counts and imagery-derived height estimates disagree, and what that gap means for antenna clearance planning.
2 Nov 2026
What is a roof bulkhead? Why it adds height but not a storeyRoof bulkheads, stair towers, and elevator overruns push rooftop height up without counting as a storey. Here's how to read them from imagery.
26 Oct 2026
Cutting a 100-candidate rooftop list to 10 site visits with height dataHow to use building height to desk-screen a rooftop candidate list before you send a crew to walk roofs.
19 Oct 2026
Field notes: the lease that closed before anyone drove past the buildingA site-acquisition field note on quoting rooftop clearance and closing a lease before a windshield survey ever happened.
19 Oct 2026
Rooftop water tank or HVAC unit? Reading satellite imageryHow to tell a rooftop water tank from an HVAC unit in satellite imagery, using shape, shadow, and placement cues telecom planners can check remotely.
14 Oct 2026
How to desk-check a rooftop candidate before the structural surveyHow site-acq planners desk-check rooftop candidates for height and storey count before paying for a structural survey.
14 Oct 2026
Satellite height estimates vs. Google Earth measurements for cell site scoutingGoogle Earth's elevation tool reads terrain, not rooftops. Here's what satellite-derived height estimates get right for desktop cell site scouting.
13 Oct 2026
Mezzanine vs. full storey: reading building height from overhead imageryMezzanine floors can inflate a storey count pulled from overhead imagery. Here's how to spot a false storey before you rank a candidate site.
13 Oct 2026
Shadow-derived vs stereo-derived building height: which to trust for a desk surveyShadow method vs stereo method building height: how each works, where it breaks down, and which to trust before a site visit.
8 Oct 2026
How many storeys do you need for a clean rooftop-to-rooftop hop?Storey count alone doesn't clear a microwave hop. Here's how site-acquisition planners work out rooftop height for RF line of sight.
8 Oct 2026
How to estimate antenna mounting height without a structural surveyA desktop method for estimating rooftop height and antenna centerline before paying for a structural survey, built for telecom site acquisition screening.
8 Oct 2026
How to tell a mechanical penthouse from usable rooftop space in satellite imageryHow to read rooftop shapes and shadows in VHR imagery to separate a mechanical penthouse from usable roof area before you schedule a visit.
8 Oct 2026
Parapet wall vs. rooftop screen wall for antenna sitingHow parapet height and screen wall structures affect RF concealment choices on rooftop antenna sites, and what you can check before a site visit.